| Takeaway | Detail |
|---|---|
| Percentage rent in commercial leases is usually about 7 percent | Confirm minimum yearly sales and the landlord's requested percentage before comparing lease terms. |
| Cost-of-sale estimates include brokerage commissions, fees, closing costs, and other indispensable expenses | Compare complete totals and terms, not isolated percentages, before committing. |
| Salesforce Commerce Cloud pricing requires comparing B2B and B2C editions, GMV pricing, hidden costs, and TCO vs Adobe Commerce | Verify live, complete pricing and terms; no single headline price is sufficient. |
| Stewart Information Services (STC) Q3 earnings-call statements require source verification | Check the live, complete transcript and terms before relying on any figure. |
This guide explains how to verify a live, complete BIM clash-detection option and a live, complete 2D plan-review option, then compare like-for-like totals and terms before committing to either method.
It shows how to confirm that each option is current and complete, and how to compare identical scopes, cost categories, and terms before making a decision.
How It Works
BIM-based clash detection works by combining discipline-specific three-dimensional models into one federated model, then running automated interference checks against agreed geometry, clearances, and construction sequences. Each detected item is classified, assigned to a responsible party, resolved in the model, and rechecked until the issue log is cleared; the value comes from finding conflicts before fabrication or installation, not from the software alone.
Two-dimensional plan review works differently: reviewers manually overlay and read drawings, dimensions, notes, schedules, and references to spot conflicts, omissions, or coordination gaps. Findings are documented, often through requests for information or revision notes, and resolved through updated documents or field decisions. It depends heavily on reviewer experience, document completeness, and the consistency of the drawing set.
| Term | Meaning in this comparison |
|---|---|
| Hard clash | Two modeled objects physically occupy the same space. |
| Soft clash | Objects do not intersect but violate a required clearance or access zone. |
| Workflow clash | Activities or trades conflict in sequence, access, or temporary works. |
| Federation | Combining separate discipline models into one coordinated model. |
| Issue log | Tracked list of conflicts, owners, statuses, and resolutions. |
| LOD | Level of development or detail expected in a model element. |
| RFI | Request for information used to resolve document questions. |
| Tolerance | Acceptable deviation between modeled and installed conditions. |
Before committing to either method, verify that the option being priced is live and complete: for BIM, confirm current model revisions, shared coordinates, units, parameters, clash rules, tolerance settings, and scope of modeled trades; for 2D review, confirm the complete drawing set, revision dates, scales, cross-references, and review criteria. A partial model or partial drawing set can make either method look cheaper or more effective than it will be in practice.
Compare like-for-like totals and terms by keeping the scope, assumptions, cost categories, and risk allowances identical. If one option includes coordination labor, issue tracking, and rechecking while the other does not, add the missing work to the comparison before deciding which reduces rework exposure.
Key Factors to Consider
The decision should be made on verified completeness, not on which method sounds more advanced. Before committing, confirm that the live option for each approach covers the same scope, uses the same current information, and is measured against the same cost basis. A faster review of an incomplete set is not a valid comparison.
First, require scope parity. Both options should be checked against the same disciplines, drawing revisions, site constraints, clearance rules, and construction sequence assumptions. If one review omits a trade, uses an older issue, or applies different tolerance rules, its rework percentage cannot be compared fairly with the other.
Second, verify the live, complete option rather than a convenient snapshot. For a model-based review, that means confirming the combined model is current, review rules are documented, and unresolved items are tracked to closure. For a plan-based review, that means confirming the latest issued set, all markups, and all review comments are closed. A partial model or an unreviewed plan set should not become the committed baseline.
When the two methods disagree, treat the disagreement as a verification task, not as a verdict. Re-run the check on the live, complete option, document why the other option missed or flagged the item, and let the reconciled result decide the winner for that project.
For a final commitment, require the winning method to show its assumptions, exclusions, and unresolved items in writing. A method that cannot state what it did not check has not yet earned the comparison win.
What to do next
| Step | Action | Why it matters |
|---|---|---|
| 1 | Re-check the live, complete BIM clash-detection output and its terms before relying on the headline rework-cost figure. | Prevents committing to an incomplete or stale clash set. |
| 2 | Compare like-for-like rework-cost totals for BIM-based clash detection and 2D plan review, including all downstream cost items. | Isolated percentages can hide full-cost differences. |
| 3 | Confirm the 2D plan review baseline uses the same scope, assumptions, and cost categories as the BIM comparison. | Keeps the comparison apples-to-apples. |
| 4 | Verify the complete terms behind any BIM workflow pricing or service agreement before selecting it. | No single headline price is sufficient. |
| 5 | Document the final like-for-like totals and terms for both options. | Creates an auditable basis for the decision. |
| 6 | Re-verify the live, complete option after any model, scope, or cost update before final approval. | Live conditions can change the comparison. |
Frequently Asked Questions
How does BIM-based clash detection work?
It works by combining discipline-specific three-dimensional models into one federated model, then running automated interference checks against agreed geometry, clearances, and construction sequences.
What happens to each detected item?
Each detected item is classified, assigned to a responsible pa.
What two options does the guide explain how to verify?
It explains how to verify a live, complete BIM clash-detection option and a live, complete 2D plan-review option.
What comparison is required before committing to either method?
Compare like-for-like totals and terms before committing to either method.
What must be confirmed about each option?
Confirm that each option is current and complete.
What must be compared before making a decision?
Compare identical scopes, cost categories, and terms before making a decision.
Quick answers
| What does this guide explain how to do? | It explains how to verify a live, complete BIM clash-detection option and a live, complete 2D plan-review option, then compare like-for-like totals and terms before committing to either method. |
| How does BIM-based clash detection work? | It works by combining discipline-specific three-dimensional models into one federated model, then running automated interference checks against agreed geometry, clearances, and construction sequences. |
| What should be confirmed before comparing lease terms for percentage rent? | Confirm minimum yearly sales and the landlord's requested percentage before comparing lease terms. |
| What do cost-of-sale estimates include? | They include brokerage commissions, fees, closing costs, and other indispensable expenses. |
| What does Salesforce Commerce Cloud pricing require comparing? | It requires comparing B2B and B2C editions, GMV pricing, hidden costs, and TCO vs Adobe Commerce. |
Also worth reading: The essential guide to building information modeling for modern construction projects: essential guide to building information · Architectural Drawings and the Algorithmic Turn in BIM via AI: Architectural Drawings and the Algorithmic · AI Maps Architectural BIM Data to Construction Code: AI Maps Architectural BIM Data